Sony CDP-M400CS Operating Instructions (CDPM400CS) страница 23 Скачать руководство пользователя

Страница: 23 / 70

CDP-M400CS

SHIPMENT MODE

•

This mode is used for setting the unit to the shipment state.
Do not execute it without a proper reason as it erases the
memory of the title memo recorded by the customer.

Procedure1:
With the power ON, while pressing the TIME button and MEGA
CONTROL button, press the

1/u

button.

Rotate the DISC/ALBUM/CHARACTER dial, select “Ship Mode”
and press the dial. “-OFF-” is displayed and the standby mode is
automaticaly entered.

Procedure2:
With the power ON, while pressing the ARTIST MODE button
and

button, press the +100 button. “-OFF-” is displayed and

the standby mode is automatically entered.

DOOR POP UP AGING MODE

•

This mode is used for performing aging of the CD pop up part
and door open/close.
It is used for checking if operations are performed normally.

Procedure1:

1. With the power ON, while pressing the TIME button and

MEGA CONTROL button, press the

1/u

button.

2. Rotate the DISC/ALBUM/CHARACTER dial, select “CDM

Test”and press the dial.

3. Rotate the DISC/ALBUM/CHARACTER dial, select

“DoorPopup Aging” and press the dial.

4. Aging starts, and door open/close and up/down operations of

the pop up part are performed continuously.

5. To end this mode, press the

1/u

button.

Procedure2:

1. With the power ON, while pressing the TOP ARTIST 3 button

and

button, press the +100 button.

2. Aging starts, and door open/close and up/down operations of

the pop up part are performed continuously.

3. To end the mode, press the

1/u

button.

ALL LIT MODE

•

This mode is used for lighting the whole fluorescent indicator
tubes and LEDs.

Procedure:
With the power ON, while pressing the TOP ARTIST4 and

buttons, press the +100 button.
Both the fluorescent indicator tubes and LEDs will light up
completely.
To end this mode, press the

1/u

button.

MODEL NAME DISPLAY

•

Model names can be displayed on the fluorescent indicator
tube for checking the microprocessor model setting, etc.

Procedure:
With the power ON, while pressing the TOP ARTIST6 and

buttons, press the +100 button.
The model name is displayed on the fluorescent indicator tube.
To end this mode, press the

1/u

button.

SPRAY MODE

•

This mode is used for the electrical adjustments.
Refer to the sedtion on Electrical Adjustment.

Содержание CDP-M400CS Operating Instructions (CDPM400CS)







































































Результаты поиска

Содержание CDP-M400CS Operating Instructions (CDPM400CS)

Отзывы:

Похожие инструкции для CDP-M400CS Operating Instructions (CDPM400CS)

Бренды по названию

Популярные бренды

Sony CDP-M400CS Operating Instructions (CDPM400CS), Руководство по обслуживанию

Результаты поиска

Содержание CDP-M400CS Operating Instructions (CDPM400CS)

Отзывы:

Похожие инструкции для CDP-M400CS Operating Instructions (CDPM400CS)

Бренды по названию

Популярные бренды