Playing CDs
Getting Started
Playing CDs
19
GB
3
Press the number button of the disc.
>10
DISC
CHECK
·
PROGRAM
Number
buttons
ENTER
CLEAR
1
Press PROGRAM until the program number you
want (PROGRAM 1, 2, or 3) appears in the display.
2
Press DISC.
4
To program a whole disc, press ENTER and go to
Step 6.
Press >10.
5
Press the number button of the track.
When the disc has more than 10 tracks, press 0 first
then press the corresponding number to enter a
track number from 1 to 9.
4
Push the JOG dial.
5
To program other discs/tracks, do the following:
To program
All tracks of another disc(s)
Other tracks on the same disc
Other tracks on other discs
6
Push the JOG dial or press
·
to start Program
Play.
To cancel Program Play
Press CONTINUE.
The programs remain even after Program Play ends
When you push the JOG dial or press
·
, you can play
the same program again.
When you press PROGRAM to select Program Play
during Continuous or Shuffle Play
The program will be played after the current track.
The program remains until erased
Even if you replace discs, the programmed disc and track
numbers remain. Therefore, the player will play the new
existing disc and track numbers. However, the
programmed disc and track numbers that are not found
in the player or on the disc are deleted from the program,
and the rest of the program is played in the programmed
order.
Note
If you press one of the GROUP 1 – 8 buttons to start Group
Play, Program Play will be canceled (see page 29).
Repeat Steps
2 and 4
3 and 4
2 to 4
The disc being
programmed
Playing order
The track being programmed
Creating a program using the remote
Z
The disc being programmed
The track being programmed
Playing order
PROGRAM1
CD1
DISC
TRACK
STEP
2 0
2 0
3
1
PROGRAM1
CD1
D I S C - [
_ ]
0
2
PROGRAM1
CD1
D I S C - [
2 0 ]
0
2
PROGRAM1
CD1
DISC
TRACK
STEP
2 0
- -
1
0
2
PROGRAM1
DISC
TRACK
STEP
2 0
2 0
3
1
(Continued)
Содержание CDP CX355 - CD Changer
Страница 35: ...35GB ...