Software Installation
Please refer to CD-RW formatting software/CD manual for instruction on
software installation. CD-RW formatting software must first be properly
installed in order to write CD’s with this device.
Using Discs
Storing Discs
●
Do not store the disc in a location subject to:
– high humidity
– high temperature
– excessive dust
– direct sunlight
Care of Discs
●
Only hold disc by its edge. Do not touch the record surface.
●
Do not wipe CD-R/RW discs before recording data.
To avoid scratching the recording surface, blow away dust using an air
blower.
Software Installation/Using Discs 15
Step 9: Installation Review
Now let us review the hardware installation process, assuring that:
●
All connectors are properly connected.
●
Each SCSI device has its own unique SCSI ID number.
●
The last physical SCSI device on the bus is properly terminated.
Notes
●
Red edge of 50 pin flat SCSI cable must be on pin 1 of host adapter.
●
The following is a sample configuration of CD-RW installation.
Step 10: Closing the Computer
Carefully replace computer cover, per Owner’s Manual.
Hardware installation is now complete!
14 Hardware Installation
1
49
50
Red Edge
0 1 2
AUDIO OUT
R GND L
INTERFACE CONNECTOR
DC INPUT
5V
±
5% GND 12V
±
10%
ACTIVE TERM
TEST
ID SELECT
1
2
49
50
CD-R/W Drive
Power
Supply
Cable
Red Edge
SCSI Card
(Not included)
Speakers
(Not included)
Sound Card
(Not included)
Audio Cable
(included)
SCSI
Cable
(Not included)
