Self-Diagnostics
12
Page 1
TRIAX Type
: Type of Triaxial circuit
TRIAX Cable
: Triax cable connection status (connected/
disconnected)
TRIAX Comp.
: Cable compensation of a triax cable
(automatic/manual)
TRIAX Step
: Compensation step of the triax cable (step
indication in the circuit) (The cable length may not be
displayed correctly.)
Fan Power
: Fan status in the CCU power block
Timer
: Power up time to devices connected
CCU Power
: Status of the CCU power supply
SerialNo
: Serial number of the CCU
Page 2
CAMERA Cable
: Camera cable connection status
(connected/short-circuited)
CAMERA Data
: Camera data transmission status
CAMERA Power:
Power supply status of the camera
CAMERA Tone
: Camera ID tone status
RCP/CNU Cable
: Connection status of the REMOTE
connector (connected/short-circuited)
RCP/CNU Data
: Data transmission status of the
REMOTE connector
RCP/CNU Power
: Power supply status of the REMOTE
connector
Page 3
Intercom CCU
: CCU intercom selection
Intercom CAMERA CH1
: Status of intercom 1 of the
camera (producer line/engineer line)
Intercom CAMERA CH2
: Status of intercom 2 of the
camera (producer line/engineer line)
CHU MIC Gain
: Gain and control status of the
microphone circuit
Settings of the network
The following pages appear only when the CCU-790/790P
is set so that it connects to the system through the Ethernet.
In order for the CCU-790/790P to establish connection via
Ethernet, internal settings must be made.
For details on the internal settings, consult your Sony
service personnel.
The network settings are displayed in 3 pages.
Page 1
MacAddress:
Mac address of the CCU-790/790P
Auto Negotiation:
Auto-negotiation setting
Auto Mdix:
Auto-MDIX setting
Connect Speed:
Connection speed setting
Duplex Mode:
Duplex mode setting
MDI/MDIX Select:
MDI/MDIX setting
Link Status:
Ethernet connection status
