Sony CBK-NC01, Руководство по установке

Страница: 17 / 84

E:\JOB\3857686011CBKNC01SYE\02GB09C01-SY.fm
masterpage:Right
CBK-NC01
3-857-686-01 (1)
17
Overview
• The CBK-NC01 Network Adaptor,
when installed into the WRR
insertion slot of a PDW-510/510P/
530/530P Professional Disc
Camcorder, allows the camcorder to
connect to the network to read and
write the files stored on the
camcorder through PC operation.
The network connector also supports
SNMP (Simple Network
Management Protocol) .
1)
• By using the supplied software PDZ-
1, the video and audio recorded onto
the professional disc is treated as
files and the files can be read or
modified through the PC (random
access).
1) Available in near future.
Precaution
If this unit is to be installed incorrectly,
personal injury or damage to peripheral
items may occur due to fire, shock, or
other accidental circumstances.
Installation
Turn the camcorder’s POWER switch
to off before installing this unit.
1
Loosen the four screws (+B2.6 ×
10) that hold the WRR cover plate
to the camcorder, and remove the
cover from the camcorder.
The screws are drop-proof and will
not become separated from the
cover plate.
2
Pull out the WRR installation
assembly from the slot of the
camcorder.
Pressing the WRR installation
assembly towards the rear side of
the camcorder will make it easier
to take out.
Note