Connecting the Digital Home Receiver
10
TV and VCR with RF Connectors Only
1
Connect the coaxial cable from the wall outlet (Cablevision cable
network signal) to the Digital Home Receiver’s
CABLE IN
jack.
2
Connect the Digital Home Receiver’s
TO TV/VCR
jack to the VCR’s
VHF/UHF IN
(or
RF IN
) jack.
3
Connect the VCR’s
VHF/UHF OUT
(or
RF OUT
) jack to the TV’s
VHF/UHF IN
(or
RF IN
) jack.
4
Connect one end of the AC power cord to the Digital Home
Receiver’s
AC IN
jack, then connect the plug end to an AC outlet.
5
Set your VCR’s channel switch (usually on the rear panel) to
channel 3.
AC cord
TV
VCR
Coaxial cable
From
wall oulet
4
2
1
3
CV.book Page 10 Thursday, November 30, 2000 2:31 PM
