8
Name and Function of Parts
Name and Function of
Parts
Top Panel
Note
In systems connected to an F65, the following handle
functions
a
to
j
cannot be used.
a
INCOM (intercom) button (SY model) / ENG (engineer
line) button (CE model)
SY model:
Turns the intercom microphone on while this
button is pressed.
CE model:
Turns the intercom microphone on and selects the
engineer line while this button is pressed.
You can also assign other functions using the menu.
b
RET 1 (return video 1) button
Monitors the return video 1 signal from the CCU in the
viewfinder while this button is pressed. It has the same
function as the RET 1 button
on the rear operation
panel.
You can also assign other functions using the menu.
c
Accessory shoe
Attaches to accessories that using a 1/4 inch screw.
d
Front tally
Displays a tally light, for example, in response to a tally input
on the connected camera control unit or a call signal is initiated
by pressing the CALL button.
e
Viewfinder shoe
Attaches to a viewfinder.
For details about attaching, see “Attaching a Viewfinder”
(page 13).
f
Handle slide button
Releases the handle while this button is pressed, allowing the
handle to slide when adjusting the position of the handle.
g
Camera mounting screws
Attaches the unit to the camera.
h
Microphone holder shoe
Attaches to a microphone holder.
i
Handle position lock lever
Locks the handle in position.
Turn the lever counterclockwise to release the handle to adjust
the handle position. After adjustment, turn the lever clockwise
to lock the handle in position.
j
Handle flip-up lock release button
Flips up the handle while this button is pressed.
k
CAMERA POWER switch
CCU:
Turns on the power supply from the camera control unit.
EXT:
Turns on the power supply from the DC IN connector.
Used when using the unit in extension mode.
Rear Panel
a
Operation panel (See “Operation panel”)
b
Connector panel (See “Connector panel”)
c
BPU (Baseband Processor Unit) connector
(optoelectrical connector)
Connects to a Baseband Processor Unit using an
optoelectrical cable.
d
VF-B (viewfinder B) connector
Connects to a DVF-series viewfinder (option).
e
VF-A (viewfinder A) connector
Connects to an HDVF-series viewfinder (option).
1
2
3
4
5
6
7
8
9
0
qa
1
2
3
4
5
6
7
8
9
