BX Series
Confidential
Mother Board -3
1.MS-1-D.27
7)
6)
Raise the Mother Board to the right side while
releasing the connector portion from the Housing.
Connector Portion
Mother Board
Mother Board
Harness (RJ45+RJ11)
Insulator (PCB)
Side-B of the Mother Board
Turn over the Insulator (PCB), and disconnect the Harness
(RJ45+RJ11) in the direction of the arrow.
* Then remove the Mother Board. (1st Model)
8)
Peel off the Kapton Tape (one place).
Mother Board
2nd Model
4
[MA]
Kapton Tape
Turn over the Mother Board toward the rear.
* As the Harness is connected to the rear of the Mother Board,
be careful not to damage the Harness.
Mother Board
Harness
2nd Model
4
[MA]
4
[MA]
9)
