Adjustment Using the Menus
24
HLG specification
1) HLG OETF: provided by ARIB STD-B67
2) Refer to BBC White Paper WHP30
[SDI 2K/HD Input Setting]
[Transfer Matrix]
Select the transfer matrix from the
following:
[ITU-R BT.709]
[ITU-R BT.2020]
Set the following depending on the
[Color Space] setting.
When [ITU-R BT.2020] is selected:
Select [ITU-R BT.2020].
When [ITU-R BT.709] is selected:
Select [ITU-R BT.709].
When another item is selected: Select
the transfer matrix setting of the device
which outputs the signal.
Note
When [Signal Format] is set to [Auto]
or [444 XYZ 12bit] and the XYZ signal
is input, the optimum setting for the
XYZ signal is fixed.
[Input Setting Skip]
Sets the skip setting when changing the
input setting by pressing the SDI 4K
button. Select [Skip]/[Not Skip] for
each input setting of [Input Setting1] to
[Input Setting4].
[Skip]:
Skips.
[Not Skip]:
Does not skip.
The EOTF’s
selection on the
unit
HLG EOTF
EOTF
×
OOTF
[HLG SG
1.2(HDR)]
[HLG OETF]
-1
1)
×
System gamma
= 1.2
[HLG SG
Variable(HDR)]
×
System gamma
= Variable
2)
Submenu
Setting
Submenu
Setting
[Input Setting]
Sets the input setting of the SDI 2K
signal.
[Input Setting1]
[Input Setting2]
[Input Setting3]
[Input Setting4]
[Input]
Set the input connector of the SDI 2K
signal.
[Input1]:
Select to use SDI IN
with Single Link.
[Input2]:
Select to use SDI IN
with Single Link.
[Input3]:
Select to use SDI IN
with Single Link.
[Input4]:
Select to use SDI IN
with Single Link.
[Input1&2]:
Select to use SDI IN
and SDI IN
with Dual Link.
[Input3&4]:
Select to use SDI IN
and SDI IN
with Dual Link.
[Interface Format] Displays the interface format of the 2K
input.
[Single-Link 3G/HD-SDI]:
For
Single Link.
[Dual-Link 3G/HD-SDI]:
For Dual
Link of 3G/HD-SDI.
[Signal Format]
Select from the following when
[Interface Format] is [Single-Link 3G/
HD-SDI].
[Auto]
[422 YCbCr 10bit]
[444 RGB 10bit]
[444 YCbCr 10bit]
[444 RGB 12bit]
[444 YCbCr 12bit]
[444 XYZ 12bit]
Select from the following when
[Interface Format] is [Dual-Link 3G/
HD-SDI].
[Auto]
[444 RGB 10bit]
[444 YCbCr 10bit]
[444 RGB 12bit]
[444 YCbCr 12bit]
[444 XYZ 12bit]
[422 YCbCr 10bit]
[1080I/PsF]
Set how to display when 50I, 59.94I,
60I, 25PsF, 29.97PsF, or 30PsF signals
are input in the SDI 2K input.
23.98 Hz and 24 Hz signals are
processed as the PsF signal.
[Auto]:
When Payload ID is added to
SDI signals, they are processed
based on the ID data. They are
processed as the interlace signals
without the Payload ID.
[PsF]:
Processes as the PsF signal.
[Interlace]:
Processes as the interlace
signal.
Содержание BVM-X300
Страница 42: ...Sony Corporation ...
