Sony BRC-X400 Скачать руководство пользователя страница 94

Страница: 94 / 104

Appendix

Message List

The following messages and indications may appear on this camera. Perform the following as necessary.

Camera Lamp Display

Camera Screen Display (Main Menu)

Lamp status

Description and solution

POWER lamp (orange) and NETWORK
lamp (green) are flashing.

An error has occurred in the camera. Details of the error are displayed in the
main menu. Check the details of the error before solving the problem.

Message

Description and solution

FAN STOP!

Turn off the device as it may malfunction if used in this state. Contact the Sony
Service Center or your licensed Sony dealer.

PAN-TILT ERROR!

The movement of the camera has stopped due to an error in the pan-tilt
driving unit. Reset the pan/tilt position. Or, turn off and on the camera.

PAN-TILT FAULT!

Turn off the device as it may malfunction if used in this state. Contact the Sony
Service Center or your licensed Sony dealer.

MEMORY FAULT!

The memory of the camera has been damaged. The camera is running on an
older version. Turn off the camera and contact the Sony Service Center or your
licensed Sony dealer.

Содержание BRC-X400









































































































Результаты поиска

Содержание BRC-X400

Отзывы:

Sony BRC-X400, Руководство по эксплуатации, Страница: 94 / 104

Результаты поиска

Содержание BRC-X400

Отзывы: