42
GB
Audio Filter
Improves the sound of individual channels when distortion
occurs in mono broadcasts. Sometimes a non-standard
broadcast signal can cause sound distortion or intermittent
sound muting in mono programmes.
If you do not experience any sound distortion, we recommend
that you leave this option to “Off” (factory setting).
~
• You cannot receive stereo or dual sound when “Low” or
“High” is selected.
Skip
Skips unused channels when you press
PROG +/–
to select
channels. To select channels you have programmed to skip,
use the corresponding number buttons.
Signal Booster
(Intelligent
Signal Booster)
Improves the picture quality if the TV signal is too strong or
weak.
If the signal is too strong (picture distorted; picture with lines;
signal interference), set to “Off”. If the signal is weak (snowy
picture), set to “Auto”.
Colour System
Selects the colour system (“Auto”, “PAL”, “SECAM”,
“NTSC3.58”, “NTSC4.43”) according to the channel.
Signal Level
Displays the signal level for programme currently being
watched.
Network Settings
Network
IP Address
Settings
DHCP
Automatically acquires the network
settings through the Dynamic Host
Configuration Protocol server function of
the router or Internet service provider.
Manual
Allows you to set the network settings
according to your network environment.
Test
Diagnoses whether the network is correctly connected.
IP Address/
Subnet Mask/
Default Gateway
You need to configure each item when “Manual” is selected
in “IP Address Settings”.
MAC Address
Displays the MAC address, which is a fixed, globally unique
identifier of the network device.
Server Display
Settings
Displays the connected server list and allows you to select the server you want to
display on the Home Menu.
Server Diagnostics
Diagnoses whether the TV can connect to each server on the home network.
Renderer Function
Enables playback of photos or music on the TV through other control devices on
the network, such as a digital still camera or mobile phone.
Renderer Access
Control
Allows you to specify the accessible controller to the TV. When this setting is set to
“On”, you can playback photos or music on the TV using the controller.
Renderer Set-up
Automatic
Access
Permission
Allows you to select whether to permit access to the TV
automatically when a network device accesses the TV for the
first time.
Renderer Name
Allows you to set the name of the TV to be shown on the
controller.
