Sony Bravia KLV-32R302F, Руководство по эксплуатации

Страница: 18 / 32

18 GB
Video/Component Input: Select [Auto]
to have the TV detect and switch
between the component video jack
or the video jack when
component video jack or video
jack is connected.
Note
• You cannot use the component video jack
and the video jack at the same time.
Speakers: Select sound output from
the TV speakers or external audio
equipment.
Headphone/Audio Out: Sets the sound
output to headphone, external audio
systems or Active Subwoofer
connected to the TV. Disconnect
headphone from the TV when you
select [Audio Out] or [Subwoofer].
Headphone Speaker Link: Switches the
TV’s internal speakers on/off when
you connect headphone to the TV.
Headphone Volume: Adjusts the
volume of the headphone.
Note
• This option is not available, when
[Headphone/Audio Out] is set to [Audio
Out] or [Subwoofer].
Audio Out:
Variable: When using an external
audio system, volume output from
audio out can be controlled using the
TV’s remote control.
Fixed:
The audio output of the TV is
fixed. Use your audio receiver’s
volume control to adjust the volume
(and other audio settings) through
your audio system.
Hint
• This option is only available when
[Headphone/Audio Out] is set to [Audio
Out].
Digital Audio Out: Sets the audio signal
that is output by connecting using
HDMI cable. Set to [Auto], when
connecting equipment compatible
with Dolby Digital or DTS. Set to
[PCM], when connecting equipment
not compatible with Dolby Digital or
DTS.
TV Position: Improves the speaker
settings when set as [Table-Top
Stand] or [Wall Mount] according to
your TV’s position.
BRAVIA Sync Settings
Allows the TV to communicate with
equipment that is compatible with the
BRAVIA Sync Control function, and
connected to the HDMI ports of the TV.
Note that communication settings must
also be made on the connected
equipment.
BRAVIA Sync Control: Sets whether or
not to link the operations of the TV
and the connected equipment that is
compatible with BRAVIA Sync
Control. When set to [On], the
following functions are available. If
the specific Sony equipment that is
compatible with BRAVIA Sync Control
is connected, this setting is applied
to the connected equipment
automatically.
Auto Devices Off: When set to [On], the
connected equipment that is
compatible with BRAVIA Sync Control
turns off when your TV goes to
standby mode.
Auto TV On: When set to [On], the TV
turns on when you turn on the
connected equipment that is
compatible with BRAVIA Sync
Control.
BRAVIA Sync Device List: Displays a list
of connected equipment that is
compatible with BRAVIA Sync
Control. Select [Enable] to update the
[BRAVIA Sync Device List].