Sony Bravia KDL-V32XBR2, Руководство по эксплуатации

Страница: 41 / 48

41
Other Information
Other Information
Troubleshooting
If you have additional questions, service needs, or required technical assistance related to the use of your
Sony TV, please visit our website or call one of the following numbers:
http://www.sony.com/TVsupport
1-800-222-SONY(7669) for US Residents
1-877-899-SONY(7669) for Canadian Residents
Problem Possible Remedies
No picture.
No picture.
❑
Check Power Saving settings (page 33).
Cannot receive any channels.
❑
Make sure the power cord is connected securely.
❑
Turn on the power of the TV.
❑
Check antenna/cable connections.
TV is locked to one channel.
❑
Perform
Auto Program
to add receivable channels that are not presently in the
TV’s memory (pages 37 and 38).
Cannot receive or select channels.
❑
Perform Auto Program to add receivable channels that are not presently in the
TV’s memory (pages 37 and 38).
❑
To receive or select cable channels, make sure that Cable in the Setup settings
is set to On (page 34). To receive or select UHF channels over an antenna, make
sure Cable is set to Off .
The TV turns off automatically.
❑
Check if the Sleep Timer is activated, or confirm the Duration setting of Timer .
(page 33).
❑
Check Power Management in the PC Settings . (page 36)
No picture from some video
sources.
❑
Check the connection between the optional video equipment and the TV.
❑
Press TV/VIDEO on the remote control (page 19).
❑
If you connect video equipment to the S VIDEO input of the TV, set Auto YC to
On in the Setup settings (page 33).
❑
Press MENU on the remote control. Select your desired input from the External
Inputs list.
Poor picture.
Double images or ghosts.
❑
Check antenna/cable connections.
❑
Check the antenna location and direction.
Only snow and noise appear on the
screen.
❑
Check if the antenna is broken or bent.
❑
Check if the antenna has reached the end of its serviceable life. (3-5 years in
normal use, 1-2 years at the seaside.)
Dotted lines or stripes.
❑
Keep the TV away from noise sources such as cars, motorcycles, or hair-dryers.
❑
If using 300 ohm twin lead, move the excess lead away from the TV or try using
75 ohm coaxial cable instead.
No color/Dark picture/Color is not
correct/The picture is too bright.
❑
Press
PICTURE
to select the desired picture mode (page 19).
❑
Adjust the
Picture Mode
options in the
Picture
settings (page 26).
❑
If you set the
Power Saving
mode to
Low
or
High
, it will enhance the black
level.
Noisy picture.
❑
Make sure that the antenna is connected using the supplied 75-ohm coaxial
cable.
❑
Keep the antenna cable away from other connecting cords.
❑
To avoid TV interference, make sure to use an undamaged antenna cable.
(Continued)