KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/
16
52EX700/52EX701/52EX703/60EX700/60EX701/60EX703
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identi
fi
es per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero speci
fi
e.
NOTE: The components identi
fi
ed by shading
and
!
mark are critical for safety. Replace only
with part number speci
fi
ed.
NOTE: The components identi
fi
ed by a red outline and a mark contain
con
fi
dential information. Speci
fi
c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
(Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
A Remove screws from Power Boards
4 from GE3-A Board (KDL-32EX700/40EX700/40EX703 Only)
4 from GE2-B Board (KDL-46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 Only)
5 from GE2-A Board (KDL-60EX700/60EX701/60EX703 Only)
B Disconnect 5 connectors from Power Boards
C Remove 4 screws from BAL Board
D Disconnect 5 connectors from BAL Board
E Slide Side Jack Bracket to right-side to remove from BAL Board
F Lift HMS2 Board to detach from Bezel
G Slide-out Lens to detach from Bezel
H Carefully Lift up Panel to remove from Bezel
1-4. GE3-A/GE2-A/GE2-B (POWER) BOARDS, BAL BOARD, HMS2 BOARD,
AND LCD PANEL REMOVAL
151 X-2541-866-1 BEZEL(32)
ASSY
(KDL- 32EX700 ONLY)
151 X-2541-867-1 BEZEL(40)
ASSY
(KDL- 40EX700 ONLY)
151 X-2547-169-1 BEZEL(40)
ASSY
(KDL- 40EX703 ONLY)
152
A-1736-860-A
HMS2 BOARD, MOUNTED
153 1-856-068-11 LENS
154 N/A
LCD
PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
155
4-171-117-01
BRACKET, SIDE JACK M
156
A-1763-462-A
BAL BOARD, COMPLETE
NOTE: For BAL Board replacement, please refer to section
2-2. Setting the Destination after Replacing the BAL Board or LCD Panel.
NOTE: Final software is not installed on this BAL Board. Install the update
after replacing this board using the instructions provided with the software.
157
1-474-213-11
GE3-A (POWER) BOARD, COMPLETE
157
156
155
152
153
151
154
A
B
D
E
G
F
H
C
1-4-1. KDL-32EX700/40EX700/40EX703
2-580-592-01
SCREW, +PSW M3X8