18
4. Setting Up the Channel List -
Initial Setup
After you finish connecting your TV, you need to
run
Initial Setup
, which automatically sets up
available channels. The
Initial Setup
screen
appears when you turn on your TV for the first
time. If you do not want to set up the channels at
this time, you can do it later by selecting the
Auto
Program
option in the
Channel
menu (see page
34).
1
Press
to turn on the TV.
The
Initial Setup
screen appears.
2
Press
V
/
v
to highlight the desired language,
then press
.
3
Connect cable or antenna, then select
Yes
to
run
Auto Program
.
~
• If you want to run
Auto Program
at a
later time,
select
No
.
• If you have cable and antenna available, please
connect cable first.
• IMPORTANT: You must perform
Auto Program
after the cable or antenna is connected. If you
cancel
Auto Program
before completion some
channels may not be available.
4
Follow the help text provided on the screen to
run
Auto Program
. The
Auto Program
will
scan for available channels from the signal
source directly connected to the TV’s
CABLE/ANTENNA input.
5
When the
Auto Program
is complete, select
OK
to finish the
Auto Program
process.
To run Auto Program at a later time
❑
Use the
Auto Program
feature at
Channel
menu as described on page 34.
To display the picture in your preferred
aspect ratio
❑
Select the proper
Wide Mode
as described on
~
• You may want to set up convenient features such as
Favorites
Show/Hide Channels
(see page 34),
Label Channels
(see page 34) when
Auto Program
is completed.
POWER
Ple
as
e
s
elect yo
u
r l
a
ng
ua
ge:
Pre
ss
to choo
s
e
a
l
a
ng
ua
ge.
Initial
S
etup
