F:\Worker\SONY WAX3 D-series EN
121\3212313121(052907)\050GET.fm
masterpage:First Right
Getti
ng Sta
rted
11
KDL-32XBR4/KDL-40D3000
Getting Started
1. Installing the TV
1
Screw the support belt (supplied) to the TV
stand with a wood screw (supplied).
2
Attach the support belt to the Table-Top Stand
with the securing screw (supplied) using a
coin, etc.
3
Adjust the length by pulling the support belt
toward you while holding the Table-Top
Stand.
~
• Be sure to take measures to prevent the TV from
toppling over and causing injury.
• The supplied wood screw may not be used depending
on the type of TV stand. In this case, or when the
securing strength is not enough, use commercial
screws
1
/
8
to
3
/
16
inch (3 to 4 mm) diameter to fit to the
TV stand. Consult your dealer about the types of
screw(s).
Preventing the TV from Toppling Over
2
3
1
TV
stand
Table-Top
Stand