44
US
D:\SONY TV\SY160031_QW UC2 IM (REV
1)\4584787121\4584787121_US\090ADD.fm
masterpage: Left
KDL-48W650D / 40W650D / 32W600D
4-584-787-
12
(1)
You do not have YouTube ID
If you do not have a YouTube ID and
password, register them through the address
below.
http://www.google.com/device
(You can also register a YouTube ID and
password from your PC.)
After registering your ID, you can use it
immediately.
The TV turns off automatically (the TV
enters standby mode)
Check if the [Sleep Timer] is activated
(page 29).
Check if the [Duration] is activated by [On
Timer] (page 29) or [Photo Frame Settings]
(page 28).
Check if the [Idle TV Standby] is activated
(page 31).
Some input sources cannot be selected
Select [Manage Inputs] and select [Always] of
the input source (page 29).
The remote control does not function
Replace the batteries.
HDMI equipment does not appear on
BRAVIA Sync Device List
Check that your equipment is compatible
with BRAVIA Sync Control.
Cannot select Off in BRAVIA Sync Control
If you have connected any audio system that
is compatible with BRAVIA Sync Control, you
cannot select [Off] in this menu. To change
the audio output to the TV speaker, select [TV
Speakers] in the [Speakers] menu (page 30).
The Parental Lock password has been
forgotten
Enter 4357 for the password.
Update password by selecting [Settings]
t
[Preferences]
t
[Parental Lock]
t
[Change
Password].
Store Display Mode or Promoting Feature
Logo appears on the screen
On the remote control, press
RETURN
then
press
HOME
and select [Settings]
t
[Preferences]
t
[Setup]
t
[Initial Setup]. Be
sure to select [Home] in [Location].
How to reset the TV to factory settings
Turn on the TV. While holding down
on the
remote control, press
on the TV. (The TV
will turn itself off, then back on again.)
Release
.
The
, +, and – buttons cannot be located
on the TV.
See below illustration for location of the
buttons on the TV.
General
Front of TV
