Sony BRAVIA KDL-32R420A, Руководство по эксплуатации

Страница: 26 / 48

26
GB
Using BRAVIA
Sync with
BRAVIA Sync
Control
The BRAVIA Sync Control function enables the
TV to communicate with the connected
equipment that is compatible with the function,
using HDMI CEC (Consumer Electronics
Control).
For example, by connecting Sony equipment
that is compatible with BRAVIA Sync Control
(with HDMI/MHL cables), you can control them
together.
Be sure to connect the equipment correctly,
and make the necessary settings.
BRAVIA Sync Control
• Automatically turns the connected
equipment off when you switch the TV to
standby mode using the remote.
• Automatically turns the TV on and switches
the input to the connected equipment when
the equipment starts to play (except in MHL
mode).
• If you turn on a connected audio system
while the TV is on, the sound output switches
from the TV speaker to the audio system.
• Adjusts the volume ( 2 +/– ) or mutes the
sound ( % ) of a connected audio system.
• You can operate the connected Sony
equipment that has the BRAVIA Sync logo by
the TV remote.
Possible operations with BRAVIA Sync
buttons, see page 13.
– Refer to the instruction manual of the equipment
for available control.
• If “BRAVIA Sync Control” of the TV is set to
“On”, “BRAVIA Sync Control” of the
connected equipment is also automatically
switched to “On”.
x
To connect the equipment that is
compatible with BRAVIA Sync
Control
Connect the compatible equipment and the TV
with an HDMI cable. When connecting an
audio system, be sure to also connect the
DIGITAL AUDIO OUT (OPTICAL) jack of the TV
and the audio system using an optical audio
cable (page 20).
x
To make the BRAVIA Sync Control
settings
The BRAVIA Sync Control settings must be set
on both the TV side and connected equipment
side. See “BRAVIA Sync Settings” page 38 for
the TV side settings. For settings on the
connected equipment, refer to the operating
instructions for that equipment.