20
GB
Start-up Logo
Select [On] to display the logo when the
TV is turned on. Select [Off] to disable it.
LED Indicator
Select [On] to light up the LED indicator.
Select [Off] to disable it.
AV Set-up
AV Preset:
Assigns name to external
equipment input.
Enable:
Select [Auto] to display names
only when the equipment is connected,
or [Always] to display regardless of
connection status.
AV2/Component Input:
Select [Auto] to
have the TV detect and switch
between the component video jack
or the video jack when component
video jack or video jack is connected.
Note
• You cannot use the component video jack
and the video jack at the same time.
Speakers:
Select sound output from
the TV speakers or external audio
equipment.
Headphone/Audio Out:
Sets the sound
output to headphones, external
audio systems or Active Subwoofer
connected to the TV. Disconnect
headphones from the TV when you
select [Audio Out] or [Subwoofer].
Headphone Speaker Link:
Switches the
TV’s internal speakers on/off when
you connect headphones to the TV.
Headphone Volume:
Adjusts the
volume of the headphones.
Note
• This option is not available, when
[Headphone/Audio Out] is set to [Audio
Out].
Audio Out:
Variable:
When using an external
audio system, volume output from
audio out can be controlled using the
TV’s remote control.
Fixed:
The audio output of the TV is
fixed. Use your audio receiver’s
volume control to adjust the volume
(and other audio settings) through
your audio system.
Digital Audio Out:
Sets the audio signal
that is output by connecting using
digital audio output (optical) cable or
HDMI (ARC) cable. Set to [Auto],
when connecting equipment
compatible with Dolby Digital or DTS.
Set to [PCM], when connecting
equipment not compatible with
Dolby Digital or DTS.
TV Position:
Improves the speaker
settings when set as [Table-Top
Stand] or [Wall Mount] according to
your TV’s position.
BRAVIA Sync Settings
Allows the TV to communicate with
equipment that is compatible with the
BRAVIA Sync Control function, and
connected to the HDMI/MHL jacks of the
TV. Note that communication settings
must also be made on the connected
equipment.
BRAVIA Sync Control:
Sets whether or
not to link the operations of the TV
and the connected equipment that is
compatible with BRAVIA Sync
Control. When set to [On], the
following functions are available. If
the specific Sony equipment that is
compatible with BRAVIA Sync Control
is connected, this setting is applied
to the connected equipment
automatically.
Auto Devices Off:
When this is set to
[On], the connected equipment that
is compatible with BRAVIA Sync
Control turns off when your TV goes
to stanby mode.
Auto TV On:
When this is set to [On],
the TV turns on when you turn on the
connected equipment that is
compatible with BRAVIA Sync Control
(except in MHL mode).
Содержание BRAVIA KDL-32R41 B Series
Страница 31: ......
