20
4. Setting Up the Channel
List - Initial Setup
After you finish connecting your TV, you need
to run
Initial Setup
, which automatically sets
up available channels. The
Initial Setup
screen appears when you turn on your TV for
the first time. If you do not want to set up the
channels at this time, you can do it later by
selecting the
Auto Program
option in the
Channel
menu (see page 34).
1
Press
to turn on the TV.
The
Initial Setup
screen appears.
2
Press
V
/
v
to highlight the desired
language, then press
.
3
Connect cable or antenna, then select
Yes
to run
Auto Program
.
~
• If you want to run
Auto Program
at a later
time, select
No
.
• If you have cable and antenna available, please
connect cable first.
• IMPORTANT: You must perform
Auto
Program
after cable or antenna is connected.
If you cancel
Auto Program
before
completion, some channels may not be
available.
4
Follow the help text provided on the
screen to run
Auto Program
. The
Auto
Program
will scan for available channels
from the signal source directly connected
to the TV’s CABLE/ANTENNA input.
5
When the
Auto Program
is complete,
select
OK
to finish the
Auto Program
process.
To run Auto Program at a later time
❑
Use the
Auto Program
feature at
Channel
menu as described on page 34.
To display the picture in your preferred
aspect ratio
❑
Select the proper
Wide Mode
as
described on pages 25 and 33.
~
• You may want to set up convenient features such
as
Favorites
Show/Hide Channels
Label
Channels
Auto Program
is completed.
POWER
Ple
as
e
s
elect yo
u
r l
a
ng
ua
ge:
Pre
ss
to choo
s
e
a
l
a
ng
ua
ge.
Initial
S
etup
