35
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-
xx
(x)
Using
Me
nu F
unc
tions
AV Preset
Assigns an icon or name to equipment connected to the side and rear sockets/jacks.
The icon and name appear briefly on the screen when you select the equipment.
1
Press
F
/
f
to select the desired input source, then press .
Skip AV Inputs
For each input, sets whether or not to display on the Home
Menu or in a list of inputs that will appear when you press
.
Auto
Displays the icon and name only when the equipment is
connected (except for AV1 or AV2 inputs).
Always Display
Always displays the icon and name regardless of whether or
not the equipment is connected.
Skip
Does not display the icon and name even if the equipment is
connected.
2
Press
g
to assign an icon and name.
Label AV Inputs
Uses preset labels to assign a name to connected equipment.
Allows you to create your own label when you select “Edit”.
Edit
Allows you to edit the name in the edit screen and choose the
appropriate icon.
AV2 Input
Sets a signal to be input through the socket labelled
/
/
AV2 on the rear
of the TV.
Auto
Switches automatically among the signals of RGB input, S
video input, Composite video input depending on the input
signal.
RGB
Inputs the RGB signal.
S Video
Inputs the S Video signal.
Composite
Inputs the Composite video signal.
AV2 Output
Sets a signal to be output to the
/
/
AV2 socket. If you connect a VCR
or other recording equipment to the
/
/
AV2 socket, you can record the
output signal from other equipment connected to the TV.
~
• This function may have some restrictions depending on the input displayed.
TV
Outputs TV broadcasts.
AV1
Outputs signals from equipment connected to the
/
AV1 socket.
AV3
Outputs signals from equipment connected to the
AV3
socket.
Auto
Outputs whatever is being viewed on the screen (except
signals from the
/
COMPONENT IN, HDMI IN1, 2, 3,
or 4, and PC IN
/
sockets).
HDMI Set-up
Allows the TV to communicate with equipment that is compatible with the Control
for HDMI function, and connected to the HDMI sockets/jacks of the TV. Note that
communication settings must also be made on the connected equipment.
Control for HDMI
Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with Control for
HDMI. When set to “On”, the following functions are
available.
If the specific Sony equipment that is compatible with
Control for HDMI is connected, this setting is applied to the
connected equipment automatically when the “Control for
HDMI” is set to “On” using the TV.
(Continued)