21
GB
GB
N
a
v
iga
ting t
hr
o
ugh Home
M
e
nu
Stereo:
Select for stereo reception when
viewing a program broadcast in
stereo.
Auto SAP:
Select to automatically switch
the TV to second audio programs
when a signal is received. If no SAP
signal is present, the TV remains in
[Stereo] mode.
Mono:
Select for mono reception. Use to
reduce noise during weak stereo
broadcasts.
Digital Dual Mono
Main + Sub:
Select the main + sub
sound track.
Main:
Select the main sound track.
Sub:
Select the sub sound track.
Advanced Settings
Dynamic Range:
Compensates for
differences in the audio level between
different channels.
Note
• The effect may not function or may vary
depending on the program regardless of the
[Dynamic Range] setting.
Dolby Digital Plus Out:
Select [Auto] to
pass through Dolby Digital Plus
stream to ARC when Dolby Digital
Plus is available through connected
Audio System.
During Dolby Digital Plus stream is
output, Digital Audio Out (optical) is
muted.
Select [Off] to convert Dolby Digital
Plus stream to Dolby Digital for both
ARC (Audio system) and Digital Audio
Out (optical).
HE-AAC Audio Level:
Adjust the HE-AAC
audio sound level.
MPEG Audio Level:
Adjusts the MPEG
audio sound level.
Wide Mode
For details about wide mode, see page 13.
Auto Wide
Automatically changes the wide mode
according to the input signal from an
external equipment.
4:3 Default
Sets the default [Wide Mode] for a 4:3
input signal.
Auto Display Area
Select [On] to automatically adjusts the
display area based upon the content or
[Off] to choose from the [Display Area]
options.
Display Area
Adjusts the picture display area.
H Center
Adjusts the horizontal position of the
picture.
V Center
Adjusts the vertical position of the picture.
Vertical Size
Adjusts the vertical size of the picture
when [Wide Mode] is set to [Wide Zoom].
PC / DCI 4K Settings
Select [Wide Mode], see page 13.
Cable/Antenna
Cable:
Select if you are receiving cable
channels via Cable TV provider.
Antenna:
Select if you are using an
antenna.
Auto Program
Automatically sets up the channel list on
the TV for all receivable channels.
Select [Auto Program] then press
.
Add Digital Channels
Select [Add Digital Channels].
Select [OK] to add digital channels.
Screen
Channel Setup
