masterpage:Left
specdef v20070110
filename[I:\FM E_data\850138S_BDV-Z2\0527_data
up\4136891111\4136891111BDVZ7AEP\02-BDVZ7AEP\gb09oth.fm]
model name [BDV-Z7_GB]
[4-136-891-
11
(1)]
60
GB
• When TV sound is output from the speakers of
the system, you can adjust the volume and turn
off the sound of the system using the TV
remote.
Note
• While the TV is in PAP (picture and picture) mode,
the System Audio Control function will not work.
When the TV exits PAP mode, the output method of
the TV returns to the one before PAP mode.
• When you connect the system and the TV with an
audio cord, the System Audio Control function does
not work.
(Volume Limit)
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATRE, loud sound may be output
depending on the volume level of the system.
You can prevent this by limiting the maximum
level of the volume. For details, see [Volume
Limit] (page 74).
(Language Follow)
When you change the language for the on-screen
display of the TV, the system’s on-screen
display language is also changed after turning
the system off and on.
Setting the Speakers
[Speaker Settings]
To obtain the best possible sound, set the
speaker’s distance from your listening position.
Then use the test tone to adjust the level and the
balance of the speakers to the same level.
1
Press HOME.
The home menu appears on the TV screen.
2
Press
C
/
c
to select
[Setup].
3
Press
X
/
x
to select [Audio Settings],
then press
.
4
Press
X
/
x
to select [Speaker Settings],
then press
.
The [Speaker Settings] display appears.
5
Press
X
/
x
to select the item, press
.
Setup the following settings.
x
[Distance]
When you move the speakers, be sure to set the
parameters of the distance (
A
) from the
listening position to the speakers.
You can set the parameters from 0.0 to 7.0
meters.
The speakers in the illustration correspond to the
following:
1
Front left speaker (L)
2
Front right speaker (R)
3
Subwoofer
[Front Left/Right] 3.0 m: Set the front speaker
distance.
[Subwoofer] 3.0 m: Set the subwoofer distance.
Setting the Maximum Volume
Level of the System
Changing the language for the
on-screen display of the TV
A
1
3
2
