Sony BDP-S1100, Руководство по эксплуатации

Страница: 27 / 36

27
Additional Information
The player cannot connect to the
network.
,
Check the network connection
(page 13) and the network settings
(page 23).
The message [A new software version
is available. Please go to the “Setup”
section of the menu and select
“Network update” to perform the
update.] appears on the screen when
turning the player on.
, See [Network Update] (page 19) to
update the player to a newer software
version.
The [Control for HDMI] function does
not work (BRAVIA Sync).
,
Check that [Control for HDMI] in
[HDMI Settings] is set to [On]
(page 22).
,
If you change the HDMI connection,
turn the player off and on again.
,
If power failure occurs, set [Control
for HDMI] in [HDMI Settings] to
[Off], then set [Control for HDMI] in
[HDMI Settings] to [On] (page 22).
,
Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is
compatible with the [Control for
HDMI] function.
– the connected component’s setting
for the [Control for HDMI] function
is correct.
,
When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for
HDMI] function, you may be unable
to control the TV from the player.
– if you change the HDMI
connection, disconnect and
reconnect the AC power cord
(mains lead), or a power failure
occurs, try the following:
1
Switch
the input selector of the AV
amplifier (receiver) so that the
picture from the player appears on
the TV screen.
2
Set [Control for
HDMI] in [HDMI Settings] to [Off],
then set [Control for HDMI] in
[HDMI Settings] to [On] (page 22).
Refer to the instruction manual
supplied with the AV amplifier
(receiver).
The System Power-Off function does
not work (BRAVIA Sync).
, Check that [Control for HDMI] and
[Linked to TV-off] in [HDMI Settings]
are set to [On] (page 22).
Playback does not start from the
beginning of content.
, Press OPTIONS, and select [Play from
start].
Playback does not start from the
resume point where you last stopped
playing.
,
The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
Network connection
Control for HDMI (BRAVIA
Sync)
Others