3
US
accordance with the instructions,
may cause harmful interference to
radio communications. However,
there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be
determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
– Reorient or relocate the
receiving antenna.
– Increase the separation between
the equipment and receiver.
– Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
– Consult the dealer or an
experienced radio/TV technician
for help.
CAUTION
You are cautioned that any
changes or modifications not
expressly approved in this manual
could void your authority to
operate this equipment.
If you have any questions about
this product, you may call; Sony
Customer Information Service
Center 1-800-222-7669 or
http://www.sony.com/
For Customers in Canada
This Class B digital apparatus
complies with Canadian ICES-
003.
If this product is not working
properly, please call 1-877-602-
2008 for
Peace of Mind
Warranty Replacement
service.
For other product related questions
please contact our
Customer
Information Service Center
at
1-877-899-7669 or write to us at:
Customer Information Service 115
Gordon Baker Road, Toronto,
Ontario, M2H 3R6
Precautions
• To avoid electrical shock, do not
open the cabinet. Refer servicing
to qualified personnel only.
• Keep the external memory away
from children. If swallowed,
promptly see a doctor.
Precautions
On safety
• To prevent fire or shock
hazard, do not place objects
filled with liquids, such as
vases, on the player, or place
the player near water, such as
near a bathtub or shower room.
Should any solid object or
liquid fall into the cabinet,
unplug the player and have it
checked by qualified
personnel before operating it
any further.
• Do not touch the AC power
cord with wet hands. Doing so
may cause an electric shock.
On placement
• Place the player in a location
with adequate ventilation to
prevent heat build-up in the
player.
• Do not place the player on a
soft surface such as a rug that
might block the ventilation
holes.
• Do not place the player in a
location near heat sources, or
in a place subject to direct
sunlight, excessive dust, or
mechanical shock.
• If the player is brought directly
from a cold to a warm location,
or is placed in a very damp
room, moisture may condense
on the lenses inside the player.
Should this occur, the player
may not operate properly. In
this case, remove the disc and
leave the player turned on for
about half an hour until the
moisture evaporates.
• Keep the player and the discs
away from equipment with
strong magnets, such as
microwave ovens, or large
loudspeakers.
• Do not place heavy or unstable
objects on the player.
• Do not install the player in an
inclined position. It is
designed to be operated in a
horizontal position only.
• Do not place any objects other
than discs on the disc tray.
Doing so may cause damage to
the player or the object.
• When you move the player,
take out any discs. If you
don’t, the disc may be
damaged.
• When you move the player,
disconnect the AC power cord
and all other cables from the
player.
On transporting the player
Before transporting the player,
follow the procedure below to
return the internal mechanisms
to their original positions.
1) Remove all the discs from the
disc slots.
2) Press OPEN/CLOSE to close
the front cover.
Make sure that “NO DISC”
appears on the front panel
display.
3) Wait for 10 seconds, then press
[
/
1
to turn off the player.
The player enters standby
mode.
4) Disconnect the AC power cord.
On power sources
• If you are not going to use the
player for a long time, be sure
to disconnect the player from
the wall outlet. To disconnect
the AC power cord, grasp the
plug itself; never pull the cord.
,
continued
US
