background image

128

n

N

Customizing Your VAIO Computer

Using Hibernate Mode

In Hibernate mode, the state of the system is saved on the hard disk drive

*

 and power is turned off. Even when the battery 

runs down, no data will be lost. The power indicator light is unlit in this mode.

*

Your computer may be equipped with two built-in flash memory storage drives along with a hard disk drive depending on the model you purchased. See the online 
specifications to find out about your storage device configuration.

If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. This power saving mode saves you the 
time of shutting down and resuming.

To activate Hibernate mode

Press the 

Fn

+

F12

 keys.

The computer enters Hibernate mode.

Alternatively, you can click 

Start

, the arrow next to the 

Lock

 button, and 

Hibernate

 to place the computer into Hibernate 

mode.

When your computer is in Hibernate mode, you cannot insert a disc.

Hibernate mode requires more time than Sleep mode to be activated.

Hibernate mode uses less power than Sleep mode.

!

Do not move your computer before its power indicator light turns off.

Содержание AW - VAIO Series 4GB RAM Laptop





























































































































































































































Отзывы: