Sony Anycast station AWS-G500, Руководство по эксплуатации

Страница: 54 / 316

Ch
apt
er 2 Prep
ar
at
ions
54
Installation/Default Settings
• When [16:9 HD] is selected, program output from the SD video interface
module (BKAW-570) or serial digital interface module (BKAW-580) and
recording to external hard disks are disabled.
Relation between aspect ratio settings, input signals, and viewer
displays
*1 Specify the aspect ratio of the input signals in the top menu with [Source Aspect] of [Video Input
Assign].
*2 Changes depending on the [Wide Zoom] setting in the ACCESS menu.
*3 Adjust [Resize] in the ACCESS menu to convert to center display.
*4 Changes depending on the [CG Wide Zoom] setting in the INT source selection menu.
Setting the System Timecode
Set the system timecode to add to files and output signals recorded on an external
hard disk.
The system timecode is used for the following functions.
• The timecode of a file recorded for program output
• The timecode of an EDL
• The timecode of a file recorded for material (except DV material)
• The timecode to add to DV signals output from a DV output connector
• The timecode to add to SDI signals output from a SDI output connector
The system timecode added with this unit is a drop frame timecode (except when
PAL is set).
Setting the time to use as the system timecode
You can set the time to use as the system timecode.
Input signals
SD input HD input RGB input CG
4:3*
1
16:9
squeeze*
1
16:9 XGA/SXGA WXGA 4:3/5:4 16:9/16:10/
5:3
4:3
mode
4:3
16:9 squeeze
16:9 squeeze
4:3
16:9 squeeze
4:3
16:9 squeeze
16:9 SD
mode
*
2
Wide screen
Center
16:9 16:9
*
3
Wide screen
16:9
*
4
Wide screen
Center
16:9
16:9 HD
mode
*
2
Wide screen
Center
16:9 16:9
*
3
Wide screen 16:9
*
4
Wide screen
Center
16:9
Note
PG
M
/PV
W
vi
ew
er di
spl
ay