Sony Anycast station AWS-G500, Руководство по эксплуатации

Страница: 232 / 316

Chap
te
r 3
O
per
at
ion
s
232
Using the Switching Information of the Unit on a Nonlinear Editing System
EDL creation ends.
After pressing the ENTER button, EDL creation will take approximately 10
seconds to end completely. Do not perform operations such as system
shutdown or starting up the Text Typing Tool during this period.
• If you press the ON LINE button while holding down the ESC button in
step 1, EDL creation ends without a confirmation message display.
• A consecutive number (1 to 999) is added automatically to each EDL file
name to enable the next EDL to be created.
Creating the next new EDL
To create another EDL, press the ON LINE button.
There is no need to enter a new file name because a consecutive number is added
automatically to each EDL file name.
To create an EDL with a different file name, repeat step 4 of “Preparing for EDL
creation” (page 230).
Exporting EDL
You can export an EDL file to a “Memory Stick” or USB flash memory.
1
Insert the “Memory Stick” or USB flash memory in the “Memory Stick” slot
or USB connector on the side panel.
The upper USB connector is number 1, and the lower connector is number 2.
2
Press the MENU button.
3
In the top menu, select [File Manager].
4
1
Select [Export EDL Type 1] or [Export EDL Type 2], and confirm;
2
select [Memory Stick], [USB Flash Memory 1], or [USB Flash Memory 2],
and confirm;
3
select the EDL file, and confirm.
Caution
Notes
FACTORY USE REMOTE
RGB(GUI)
RESET
USB
NETWORK
1 8
15 9
1 5
USB connectors
“Memory Stick” slot
Delete
Disconnect
Recover
Rename
Convert AVI
Export EDL Type 1
Export EDL Type 2
Export VOD File
Export Job
Memory Stick
USB Flash Memory 1
USB Flash Memory 2
All
xxxxxxxxxx.edl
xxxxxxxxxx.edl
xxxxxxxxxx.edl
xxxxxxxxxx.edl
1 2 3