Sony Anycast station AWS-G500, Руководство по эксплуатации, Страница: 121 / 316

121
Creating a Title Graphic With the Text Typing Tool
Chap
te
r 3
O
per
at
ion
s
Closing Down
To power off the unit
Press the
1
power button on the side panel.
The following message appears, the Text Typing Tool software ends, and the
power is turned off.
If there is a file in the process of creation, the program will end without saving it.
To close the Text Typing Tool software and start the Anycast Station main
software
1
Click the [Exit] button at the lower left of the screen.
The screen goes black and the Anycast Station main software starts.
You can also use the keyboard F5 (Fn+5) key to switch to the Anycast
Station main software.
In this case, following confirmation message appears.
If a file is being created, a message appears to confirm whether to save the
file.
2
Click the [Enter].
Standard Operations
This section describes standard operations used as various points in the Text
Typing Tool software.
Mouse operations
• By connecting a USB mouse to the USB connector on the side panel, you can
carry out mouse operations.
• You can also carry out mouse operations with the pointer of the supplied
keyboard.
Caution
Note