Sony a6600, Руководство пользователя

Страница: 207 / 629

Help Guide
Interchangeable Lens Digital Camera
ILCE-6600
α6600
Using flash (sold separately)
In dark environments, use the flash to light up the subject while shooting. Also use the flash to prevent camera-shake.
For details on the flash, refer to the instruction manual for the flash.
Note
The light of the flash may be blocked if the lens hood is attached and the lower part of a recorded image may be shaded.
Remove the lens hood.
When using the flash, stand 1 m or more away from the subject.
You cannot use the flash when recording movies. (You can use an LED light when using a flash (sold separately) with an LED
light.)
Before attaching/removing an accessory such as a flash to/from the Multi Interface Shoe, turn off the product first. When
attaching an accessory, make sure that the accessory is fixed securely to the product.
Do not use the Multi Interface Shoe with a commercially available flash that applies voltage of 250 V or more or has the reverse
polarity of the camera. Doing so may cause a malfunction.
When shooting with the flash and the zoom is set to W, the shadow of the lens may appear on the screen, depending on the
shooting conditions. If this happens, shoot away from the subject or set the zoom to T and shoot with the flash again.
The corners of a recorded image may be shaded, depending on the lens.
When using flash to shoot pictures of yourself, be careful not to look directly at the light, because the flash will go off at a close
distance.
For details on compatible accessories for the Multi Interface Shoe, visit the Sony website, or consult your Sony dealer or local
authorized Sony service facility.
Attach the flash (sold separately) to the product.
1
Shoot after you have turned on the flash and it is fully charged.
blinking: Charging is in progress
lit up: Charging is finished
The available flash modes depend on the shooting mode and function.
2
207