Sony A6500, Руководство пользователя

Страница: 569 / 585

Help Guide
Interchangeable Lens Digital Camera
ILCE-6500
α6500
Precautions
Refer also to "Notes on using your camera" in the Instruction Manual (supplied) for this product.
Backing up memory cards
Data may be corrupted in the following cases. Be sure to back up the data for protection.
When the memory card is removed, the USB cable is disconnected, or the product is turned off in the middle of a
read or write operation.
When the memory card is used in locations subject to static electricity or electrical noise.
Database file error
If you insert a memory card that does not contain an image database file into the product and turn on the power, the
product automatically creates an image database file using some of the memory card’s capacity. The process may take a
long time and you cannot operate the product until the process is completed.
If a database file error occurs, export all images to your computer using PlayMemories Home, and then format the
memory card using this product.
Do not use/store the product in the following places
In an extremely hot, cold or humid place
In places such as in a car parked in the sun, the camera body may become deformed and this may cause a
malfunction.
Storing under direct sunlight or near a heater
The camera body may become discolored or deformed, and this may cause a malfunction.
In a location subject to rocking vibration
Near strong magnetic place
In sandy or dusty places
Be careful not to let sand or dust get into the product. This may cause the product to malfunction, and in some cases
this malfunction cannot be repaired.
In places with high humidity
This may cause the lens to mold.
On storing
Always attach the lens front cap or body cap when you are not using the camera. To prevent dust or debris from getting
inside the camera, remove dust from the body cap before attaching it to the camera.
Precaution on carrying
Do not carry the camera with the tripod attached. This may cause the tripod socket hole to break.
On operating temperatures
Your product is designed for use under the temperatures between 0°C and 40°C (32 °F and 104 °F). Shooting in
extremely cold or hot places that exceed this range is not recommended.
569