Eyeball IR Fixed Dome
540TV Lines
Super High Resolution Color Camera
INSTRUCTION MANUAL
Power source
Power consumption
Image sensor
Number of pixels
Scanning system
Scanning frequency
Sync. system
Electronic shutter
Resolution
Min. illumination
Video output
Power input
AGC
Lens mount
2:1 interlace
15.734KHz(H) x 59.94Hz(V)
Internal
1/60 ~ 1/100,000 sec.
540 TV lines (Color)
1.0
lux(COLOR), 0 lux(BW at IR ON) @ F1.2, 50 IRE
More then 50dB (AGC off)
F3.6mm Fixed mount
752(H) x 582(V)
DC Jack
Fixed mount
540TVL (NTSC)
2.0 Watts (IR LED ON)
768(H) x 494(V)
MODEL
S/N ratio
BLC
White Balance
Power
15.625KHz(H) x 50Hz(V)
1/50 ~ 1/100,000 sec.
Lens
Connector
&
etc.
540TVL (PAL)
Video output
Operating Temperature
1.0 Vp-p (75 ohm, composite)
ATW
BNC Connector
]
-10°C ~ +50°C [14° F ~ 122° F
General
ON
Operating humidity
0 ~ 96% (non-condencing)
1/3" SONY Super HAD CCD
ON
Day / Night
Auto
IR LED / SENSOR
LED Lighting Distance
IR LED 24EA(850nm/70 degree),SENSOR 1EA
10M
* Use the power consumption 3W over.
Unit: mm
EXTERNAL DIMENSION
2
3
540TV Lines
Super High Resolution Color Camera
PRINTED IN KOREA
50302650A
SPECIFICATIONS
ProtectionType
IP67
BASE INSTALLATION
To avoid the scratch, please install as followed.
6. Fix ring to the base.
1.Make mounting holes and cable hole in the place(ceiling) to which this camera is installed
using the supplied template sheet
2. Fix the base firmly with supplied mounting screw, plastic anchor
3. Connect BNC cable and communication lines
4. Attach the camera and tall ring
5. Adjust desired focus and scene by turning and moving the sphere by hand
7. Lock the camera with set screw, wrench
Ceiling / Wall
Template Sheet (1x)
Plastic Anchors (4x)
BASE
BTS1 3.5x25 Mounting Screws (4x)
Camera
Tall Ring
Hex socket screw (M2.5xL3)
Fix Ring
.
Ø6
8 5
Ø93.0
4
5
.5
8
0
.0
To avoid the diffused reflection when IR LED ON, please install as followed.
1. Remove the object near the camera (under 0.5M)
2. Adjust the camera view angle to avoid the diffused reflection by the tall ring.
