background image

35

GB

P

re

cautions/Spe

cific

ations

CMT-SBT20

4-583-746-

11(1)

On the speaker system

This speaker system is not magnetically 
shielded, and the picture on nearby TV sets 
may become magnetically distorted. In 
this situation, turn off the TV, wait 15 to 30 
minutes, and turn it back on. If there is no 
improvement, move the speakers far away 
from the TV.

Cleaning the cabinet

Clean this system with a soft cloth slightly 
moistened with a mild detergent solution. 
Do not use any type of abrasive pads, 
scouring powder, or solvents, such as 
thinner, benzine, or alcohol.

On moving the system

Before moving the system, make sure that 
there is no disc loaded, and remove the 
power cord from the wall outlet.

On handling discs

 

• To keep the disc clean, handle the disc by 

its edge. Do not touch the surface.

 

• Do not attach paper or tape to the disc.

 

• Do not expose discs to direct sunlight or 

heat sources such as hot air ducts, or leave 
them in a car parked in direct sunlight, as 
the temperature may rise considerably 
inside the car.

Websites for 

compatible devices

Check the websites below for the latest 
information about compatible USB and 
BLUETOOTH devices.

For customers in Europe:
http://www.sony.eu/support
For customers in Latin America:
http://esupport.sony.com/LA
For customers in other countries/regions:
http://www.sony-asia.com/support

Содержание 4548736019614









































Отзывы: