15
GB
List
ening t
o the r
adio
CMT-SBT20
4-583-746-
11(1)
Listening to the radio
Tuning to a radio
station
1
Press FM
.
2
Perform tuning.
For automatic scanning
Press TUNING MODE
repeatedly until
“AUTO” appears, and then press
/–
. Scanning stops
automatically when a station is tuned
in.
If the scanning for an FM station does
not stop, press
to stop scanning,
then perform manual tuning.
For manual tuning
Press TUNING MODE
repeatedly until
“MANUAL” appears, and then press
/–
repeatedly to tune to the
desired station. Each time you press
/–
, the frequency changes
step by step. If you hold /–
down, the frequency changes
continuously until the button is
released.
Tip
• When you tune to a station that provides RDS
services, the service name or station name
appears on the display (European model only).
• If reception of an FM stereo broadcast is noisy,
press FM MODE
repeatedly to select “MONO”
to select monaural reception. This reduces noise.
Presetting radio
stations
You can preset your desired radio stations.
1
Tune to the desired station.
2
Press TUNER MEMORY
.
3
Press /–
repeatedly
to select a preset number, then
press
.
You can also select a preset number by
pressing TUNER MEMORY number (1 to
4)
or
/
/
/
.
Preset number
“COMPLETE” appears on the display
and the radio station is registered with
the preset number.
Repeat the steps above to register
further radio stations.
Tip
• You can preset up to 20 FM stations.
• If you select an already-registered preset number
in step 3, the preset radio station is replaced by
the currently tuned-in radio station.