27
A
d
d
iti
o
n
a
l I
n
fo
rm
a
tio
n
The player cannot connect to the network.
,
Check the network connection (page 12)
and the network settings (page 24).
The message “A new software version has
been found on the network. Perform
update under "Network Update."” appears
on the screen when turning the player on.
,
See “Network Update” (page 19) to update
the player to a newer software version.
The “Control for HDMI” function does not
work (BRAVIA Sync).
,
Check that “Control for HDMI” is set to
“On” (page 23).
,
If you change the HDMI connection, turn
the player off and on again.
,
If power failure occurs, set “Control for
HDMI” to “Off,” then set “Control for
HDMI” to “On” (page 23).
,
Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is compatible
with the “Control for HDMI” function.
– the connected component’s setting for
the “Control for HDMI” function is
correct.
,
When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the “Control for HDMI”
function, you may be unable to control
the TV from the player.
– if you change the HDMI connection,
disconnect and reconnect the mains lead,
or a power failure occurs, try the
following:
1
Switch the input selector of
the AV amplifier (receiver) so that the
picture from the player appears on the
TV screen.
2
Set “Control for HDMI” to
“Off,” then set “Control for HDMI” to
“On” (page 23). Refer to the instruction
manual supplied with the AV amplifier
(receiver).
Playback does not start from the
beginning of content.
,
Press OPTIONS, and select “Play from
start.”
Playback does not start from the resume
point where you last stopped playing.
,
The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
The disc tray does not open and
“LOCKED” or “TLK ON” appears on the
front panel display.
,
When “LOCKED” appears, the player is
locked. To cancel the Child Lock, hold
down
N
on the player until “UNLOCK”
appears on the front panel display (page 6).
,
When “TLK ON” appears, contact your
Sony dealer or local authorised Sony
service facility.
The disc tray does not open and you
cannot remove the disc even after you
press
Z
.
,
Try the following:
1
Turn the player off,
and disconnect the mains lead.
2
Reconnect the mains lead while pressing
down
Z
on the player.
3
Keep pressing
down
Z
on the player until the tray opens.
4
Remove the disc.
5
When “WAIT”
appears on the front panel display, hold
down
[
/
1
on the player for more than 10
seconds until the player turns on again.
“Exxxxx” or “FAN ERR” appears on the
front panel display.
,
When “Exxxxx” appears, contact your
nearest Sony dealer or local authorised
Sony service facility and give the error
code.
Network connection
BRAVIA Sync (“Control for
HDMI”)
Others
,
continued
Содержание 4-169-142-11(1)
Страница 35: ...35 ...
