52
3
Select “OK” or “Cancel,” and press
ENTER.
Follow the on-screen instructions.
The HD indicator lights up when
outputting 720p/1080i/1080p video
signals.
b
• If no picture appears after changing the
“Output Video Format” settings, hold down
x
on the player for more than 10 seconds.
The video output resolution will be reset to
the lowest resolution.
• When connecting the HDMI OUT jack and
other video output jacks at the same time,
video signals may not output from the jacks,
other than from the HDMI OUT jack, when
“Auto” or “1080p” is selected (page 76).
When connecting other equipment at the
same time, press RETURN to return to step
2 and change the “TV Connection Method”
setting.
HDMI Resolution/Component Resolution
Sets to output 1920
×
1080p/24 Hz video
signals when playing film-based materials on
BD-ROMs (720p/24 Hz or 1080p/24 Hz).
1920 × 1080p/24 Hz video signals can be
output when all of the following conditions
are met.
– You connect a 1080/24p-compatible TV
using the HDMI OUT jack,
– “Output Video Format” is set to “HDMI,”
and
– “HDMI Resolution” is set to “Auto” or
“1080p.”
b
No BD-ROM picture appears when the connected
TV is non-compatible with 1080/24p and “BD-
ROM 1080/24p Output” is set to “On.” In this case,
press HOME to display the home menu, and change
the “BD-ROM 1080/24p Output” setting.
Sets the colour setting for video signals
output from the HDMI OUT jack. Select the
setting that matches the connected TV type.
Auto (HDMI
only)
Normally select this.
The player outputs
signals starting from the
highest resolution
acceptable to the TV:
1080p > 1080i > 720p >
480p/576p > 480i/576i
If the resulting image
format is undesirable,
try another setting that
suits your TV.
480i/576i
Outputs 480i/576i video
signals.
480p/576p
Outputs 480p/576p
video signals.
720p
Outputs 720p video
signals.
1080i
Outputs 1080i video
signals.
1080p (HDMI
only)
Outputs 1080p video
signals.
BD-ROM 1080/24p Output
Auto
Outputs 1920 × 1080p/
24 Hz video signals only
when connecting a 1080/
24p-compatible TV using
the HDMI OUT jack.
On
Outputs 1920 × 1080p/
24 Hz video signals
regardless of the connected
TV type.
Off
Select this when your TV is
not compatible with 1080/
24p video signals.
YCbCr/RGB (HDMI)
Auto
Automatically detects the
connected TV type, and
switches to the matching
colour setting.
YCbCr (4:2:2)
Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4)
Outputs YCbCr 4:4:4 video
signals.
RGB (16-235)
Select this when connecting
to a device that only
supports RGB limited range.
RGB (0-255)
Select this when connecting
to an RGB (0-255) device.
