Sony 4-130-031-11(3) Скачать руководство пользователя

Страница: 21 / 72

Ge
tt

ing St

ar
te

Notes

• To input multi channel digital audio from the DVD

player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.

• When connecting optical digital cords, insert the

plugs straight in until they click into place.

• Do not bend or tie optical digital cords.
• Be sure to connect the video output of the DVD

player, DVD recorder and VCR to the TV, so that
the image is displayed on the TV. Refer to the
operating instructions of each connected
component for details.

• You cannot do recording on the DVD recorder or

VCR via this receiver. For details, refer to the
operating instructions supplied with the DVD
recorder or VCR.

Tip

All the digital audio jacks are compatible with

32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.

5: Connecting the
antennas

Connect the supplied AM loop antenna and
FM wire antenna.
Before connecting the antennas, be sure to
disconnect the AC power cord (mains lead).

* The shape of the connector varies depending on

the area code of this receiver.

Notes

• To prevent noise pickup, keep the AM loop

antenna away from the receiver and other
components.

• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as

horizontal as possible.

HDMI

mA MAX

BD IN

OUT

SAT IN

DVD IN

AUDIO IN

VIDEO 1

VIDEO 2

AUDIO IN

SA-CD/CD

COAX IN

SAT

OPT IN

AUDIO IN

DIGITAL

ANTENNA

FM wire antenna (supplied)

AM loop antenna (supplied)

Содержание 4-130-031-11(3)









































































Результаты поиска

Содержание 4-130-031-11(3)

Отзывы:

Похожие инструкции для 4-130-031-11(3)

Бренды по названию

Популярные бренды

Sony 4-130-031-11(3), Руководство по эксплуатации

Результаты поиска

Содержание 4-130-031-11(3)

Отзывы:

Похожие инструкции для 4-130-031-11(3)

Бренды по названию

Популярные бренды