Sony 3-875-814-11(1), Руководство по эксплуатации

Страница: 158 / 175

158 GB
9
Press V / v / B / b to select “Finish,” then
press .
The name you entered is registered.
To cancel naming input
Press V / v / B / b to select “Cancel,” then press
.
To erase a programmed macro
1
Press AMP.
The receiver can be operated using the
remote.
2
Press MENU.
The menu is displayed on the TV screen.
3
Press V / v repeatedly to select
“ Settings,” then press or b .
4
Press V / v repeatedly to select “Quick
Click,” then press or b .
5
Press V / v repeatedly to select “Macro
Setup,” then press .
6
Press V / v repeatedly to select the
macro number you want, then press
.
7
Press V / v repeatedly to select the step
number you want, then press .
8
Press
V
/
v
repeatedly to select “–” as a
component name, the press .
9
Repeat steps 8 and 9 to clear the
stored macro.
10
Press V / v repeatedly to select “Finish.”
Settings stored as a macro are cleared.
Setting remote control
codes that are not stored
in Quick Click
1
Press AMP.
The receiver can be operated using the
remote.
2
Press MENU.
The menu is displayed on the TV screen.
3
Press V / v repeatedly to select
“ Settings,” then press or
b .
4
Press V / v repeatedly to select
“Quick Click,” then press or
b .
5
Press V / v repeatedly to select
“Source Component,” or
“Common Component,” then
press .
AMP
V / v / B / b ,
MENU