27
Ho
oku
p
s a
nd
Set
tings
Step 6: Preparing the
Remote
You can control the player using the supplied
remote. Insert two R6 (size AA) batteries by
matching the
3
and
#
ends on the batteries
to the markings inside the battery
compartment. When using the remote, point
it at the remote sensor
on the player
b
• Use the batteries correctly to avoid possible
leakage and corrosion. Should leakage occur, do
not touch the liquid with bare hands. Observe the
following:
– Do not use a new battery with an old battery, or
batteries of different manufacturers.
– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an
extended period of time, remove the batteries.
– If battery leakage occurs, wipe out any liquid
inside the battery compartment, and insert new
batteries.
• Do not expose the remote sensor (marked
on
the front panel) to strong light, such as direct
sunlight or a lighting apparatus. The player may
not respond to the remote.
You can control the volume, input source,
programme position, and power switch of
your Sony TV with the supplied remote.
b
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
Available buttons
Depending on the connected unit, you may
not be able to control your TV with some or
all of the buttons (TV
[
/
1
, PROG +/–,
2
+/–,
%
, or number buttons).
Controlling TVs with the
remote
Buttons
Operations
TV
[
/
1
Turns your TV on or off.
2
(volume) +/–
Adjusts the volume of
your TV.
PROG
(programme) +/–
Selects the programme
position on your TV.
t
(input select)
Switches your TV’s input
source between the TV
and other input sources.
%
(muting)
Mutes the sound.
Number
buttons
TV
[
/
1
2
+/–
t
%
PROG +/–
,
continued
