Sony 2-661-374-11(4), Руководство по эксплуатации

Страница: 24 / 40

24
GB
Other operations
Notes
• You cannot select the Play Timer and Timer
Recording at the same time.
• If you use the Timer Recording and the Sleep Timer
at the same time, the Sleep Timer has priority.
• The Timer Recording will not be activated if the
system is turned on.
• The volume is reduced to minimum during Timer
Recording.
• Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
Tips
• The system turns on 15 seconds before the preset
time.
• When the Timer Recording is selected, “REC” lights
up in the display.
The demonstration display and the clock display
can be turned off to minimize the amount of
power consumed during standby mode (Power
Saving Mode).
Press DISPLAY repeatedly while the
system is turned off until the
demonstration display and the clock
display disappears from the display.
To cancel Power Saving Mode
Press DISPLAY repeatedly while the system is
turned off. Each time you press the button, the
display changes cyclically as follows:
Demonstration
1)
t
Clock
2)
t
No display
(Power Saving Mode)
1)
The display changes and the indicators flashes even
when the system is turned off.
2)
“--.--” appears in the display if you have not set the
clock.
Note
You cannot do the following operations during Power
Saving Mode:
– Setting the clock (page 9)
– Changing the AM tuning interval (page 14)
– Turning on the system by pressing the function
buttons (CD, TAPE A/B, TUNER/BAND, TV or
VIDEO/MD)
– Changing CD power manage setting (page 14)
Tips
• The timer continues to operate in Power Saving
Mode.
•
?/1
indicator lights up in red color even in the
Power Saving Mode.
To Do this
Check the setting
1
Press CLOCK/TIMER
SELECT.
“SELECT” appears in the
display.
2
Press –
.
or
>
+ (or
press
.
or
>
on the
unit) repeatedly to select
“REC SELECT?”, then press
ENTER.
Change the setting Start from step 1.
Cancel the timer
1
Press CLOCK/TIMER
SELECT.
“SELECT” appears in the
display.
2
Press –
.
or
>
+ (or
press
.
or
>
on the
unit) repeatedly to select
“TIMER OFF?”, then press
ENTER.
Display
Turning off the display
— Power Saving Mode