Sony Ericsson W700i, Руководство пользователя

Страница: 30 / 103

This is the Internet version of the user's guide. © Print only for private use.
30 Calling
To reject a call using voice
commands
When the phone rings, say “Busy”.
The call is rejected. The caller is
forwarded to voicemail, if activated,
or hears a busy tone.
Editing your voice commands
You can edit all your voice commands
saved in
Contacts . Select the contact
you want to edit a voice command for
}
More
}
Edit Contact . Scroll to the
relevant tab and edit your voice
command.
To rerecord a voice command
1
}
Settings
}
the General tab
}
Voice Control
}
Voice Dialing
}
Edit Names .
2 Select a voice command
}
More
}
Replace Voice .
3 Wait for the tone and say the
command.
Tips when recording and using voice
commands
If your phone cannot detect your voice
command, one of the following might
have happened:
•
You spoke too softly – try speaking
louder.
•
You held the phone too far away –
hold it as you do during a call.
•
The voice command was too short –
it should be around one second long
and more than one syllable.
•
You spoke too late or too soon –
speak immediately after the tone.
•
You did not record the voice command
when the handsfree was attached –
for voice control with a handsfree kit,
record when the handsfree is attached.
•
You used another intonation – use the
same intonation as in the recorded
voice command.
Forwarding Calls
If you cannot answer incoming calls,
you can forward them to another
number, for example, your answering
service.
You can choose between the following
forward options:
•
Always Forward – forward all calls.
•
When Busy – forward calls if you are
already on the phone.
•
Not Reachable – forward calls if
your phone is turned off or if you
are unreachable.
•
No Reply – forward calls that you do
not answer within a specified time limit.
When the Restrict calls function is
activated, some Forward calls options
are not available.