Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
28(128)
3.1.3
Display Cover Removal
The sections of the Flip Disassembly preceding this section must be performed in sequential
order before the disassembly steps listed below can be performed.
Tools needed:
•
Torque screwdriver
•
Torx Plus size 5 bit
•
Style 2A ESD tweezers (Blunt tip)
•
Front opening tool
Step-by-Step Instructions
NOTE! Be careful not to scratch the inner flip cover
when removing the flip’s screw cover panel.
1.
Begin lifting the screw cover panel away from the
inner flip cover by using the tip of one side of a pair
of style 2A tweezers or a front opening tool at one of
the two locations indicated.
2.
Once a portion of the screw cover panel is slightly
lifted, grip the lifted portion of the panel and peel it
off of the flip.
NOTE! The screw cover panel cannot be reused.
3.
Carefully clean off any remaining adhesive residue
from the area where the screw cover panel mounts
using the style 2A tweezers, alcohol, and a lint free
wipe.
4.
Using a torque driver with a Torx Plus size 5 bit,
remove the two screws that were concealed by the
flip’s screw cover panel.
5.
Using a torque driver with a Torx Plus size 5 bit,
remove the two screws indicated from the display
cover side of the flip assembly.
