84 Control panel
M608c
This is the Internet version of the user's guide. © Print only for private use.
Mark
Allow USB charging
to enable phone
battery charging over USB. It is recommended
not to use this function when connecting to an
un-powered USB hub or to a device only using
battery power.
Note:
During data transfer over USB, do not
change the USB settings or disconnect the
phone from the other device, as this may cause
a data loss.
Device
Backlight
You can select how the display and keyboard
backlight should behave for handheld use and
when the phone is in a car holder. The lower
the brightness you choose, the longer the
battery will last before it needs charging. Set
the car holder levels low enough so that you
sustain natural night vision.
Select
Tools > Control panel > Device >
Backlight
to make the settings.
Settings tab
Auto
– backlight switches on when you
tap the screen, press a key or receive an
incoming call. After a short time of
inactivity the light switches off.
On
– backlight is always on, but after a
short time of inactivity it fades to the
dimmed level that you can adjust on the
Brightness tab.
Brightness tab
Select the backlight mode and adjust the
brightness with the slider or the Jog Dial.
Select
Default
to reset all light levels to the
factory values.
Device management
Device management enables the remote
distribution of settings for your phone, for
example Internet, email, SMS and MMS. It
also makes it possible to manage (list, install,
update and uninstall) themes and client
software on the phones. Device management
is useful if an enterprise has, for example,
defined a set of standard software that should
be used on all employees’ phones.
To enter the settings or manage software in the
phone, a device management session is set up
between the phone and a device management
server. The session can be initiated from the
phone by you or from the server.