Sony Ericsson M600i, Руководство пользователя

Страница: 71 / 99

M600i Control panel 71
This is the Internet version of the user guide. © Print only for private use.
If you are pairing with a Bluetooth headset, the
headset may have auto pairing functionality.
This means you do not have to initiate pairing,
as the headset does so when switched on. It
also means you do not have to enter a
passcode, but you must still confirm the
pairing.
When you select a device from the list, a list of
options opens:
Device options
Device name
– select to change the name
of the device. This only affects how the
device is presented in your phone.
Trust this device
– allows the device to
connect to your phone without your
confirmation every time.
Enable as audio
– to use the device (for
example, a Bluetooth headset) in audio
applications. Devices enabled for audio
are listed in the audio tab,
.
Bluetooth services
The services (sometimes called profiles)
supported by the connected device are listed in
the detail view for the device. On the
tab,
select the device and then select the right
Services
tab.
Audio tab
This is where all paired devices that are
marked
Enable as audio
are listed. You can
later disable a device for audio to prevent your
phone from accidentally transferring sound to
it.
Infrared port
Select
Tools > Control panel > Connections >
Infrared
to activate the infrared port.
Infrared options
On
or
On for 10 minutes
– switches the
port on.
Off
– switches the port off.
Internet accounts
See Setting up Internet, email and MMS on
page 61.
Mobile networks
Select Tools > Control panel > Connections >
Mobile networks to set the way your phone
should choose an available network, when you
are outside your operator’s coverage area.
Mobile networks has two tabs, Search and
Preferred list .
Search tab
The phone searches for a network. You can
choose between
Automatic or Manual search.