23
Calling
Voice control
By creating voice commands you can:
•
Voice dial – call someone by saying
their name
•
Activate voice dialling by saying
a “magic word”
•
Answer and reject calls when you
use a handsfree
To record a voice command using
voice dialling
1
From standby select
> the
.
2
Select
and
select a contact. If the contact has more
than one number, select the number
to add the voice command to.
3
Record a voice command such as
“John mobile”.
4
Follow the instructions that appear.
Wait for the tone and say the command
to record. The voice command
is played back to you.
5
If the recording sounds OK, select
If not, select
and repeat steps 3
and 4.
To re-record a voice command
1
From standby select
>
> the
>
.
2
Scroll to a command and select
>
3
Wait for the tone and say the command.
Voice dialling
You can hear your recorded contact
name when you receive a call from
that contact.
To voice dial
1
From standby press and hold down
a volume key.
2
Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the
call is connected.
The magic word
You can record and use a voice
command as a magic word to activate
voice dialling without pressing any keys.
Your handsfree must be connected to
your phone when using the magic word.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
This is the Internet version of the User's guide. © Print only for private use.