This is the Internet version of the user's guide. © Print only for private use.
Setting up WAP and email
57
• Your password to log on to the external data
network.
• Password request – if this setting is on, you are
asked for a password each time you log on to the
external data network.
• Preferred service – if you want to be able to
accept incoming calls during a GPRS session,
select
. If not, select
• The IP address that the phone uses when
communicating with the network. If you do not
enter an address, the network provides you with
a temporary IP address.
• If the network does not provide the IP address
to the DNS server automatically, you may enter
it here.
• Advanced settings – these are optional. Consult
your service provider.
GSM
settings include some settings that are similar
to GPRS settings and some that are GSM-specific
as follows:
• The phone number of your Internet service
provider.
• Select the speed you want for the connection.
• Select analog or ISDN connection.
Note:
If you want to change access type, you have to
create a new data account and select the access type
you want to use.
Preferred service
You can set GPRS or GSM as the preferred service.
To select preferred mode
• Scroll to
and select
.
WAP security
Your phone has support for WAP secure browsing.
When you turn on security, the connection between
your phone and the WAP gateway is secure.
Note:
Security for a connection between a
WAP gateway and a WAP service provider is
the responsibility of the WAP service provider.
To turn on a secure connection
1.
Scroll to
2.
Select the profile to be used. Press
3.
4.
Select
.