Sontex Supercal 5 I, Инструкция по эксплуатации

Страница: 30 / 68

30 Instruction for use | Supercal 5
6.4 Menus
Six menus are available. The Overview menu is used to select the operational menus: Main,
Metrological, Configuration, Service and Commissioning .
The Commisioning menu is only available when the calculator is used for the first time, or
when the calculator is manually “unsealed”.
Notes

The error message in the main menu only appears if an error is present.
The sum of the error codes is displayed. The content corresponds to the
value of the error message parameter in the “Service” menu.
6.5 Commissioning
Once the Supercal 5 is unsealed, the Commissioning Menu is available in the Main Menu.
This setup menu allows the customer to configure the calculator via NFC. Other, non-metro -
logical settings can always be changed using a smartphone via NFC or by using the Super-
prog and an optical interface.
After setup by NFC employing Superprog Android is completed, the Supercal 5 has to be
sealed.

Commissioning: commissioning menu

Configuration via NFC

1 × short press on the left button

Seal configuration

SEAL: seals the configuration and
switches to Default Menu

1 × long press on the left button
(> 2 seconds)

Cumulated energy

Cumulated volume
Now the Supercal 5 is ready for use.