SonoSite iLook, Руководство пользователя, Страница: 46 / 102

38
Chapter 4: Accessories
A
ccessor
ies
Auxiliary Power Cable
The auxiliary power cable is used with the power supply to charge the system battery when the
system is not in use and a docking station or stand is not available.
To connect the auxiliary power cable:
1
Lay the system on a flat surface with the display side up.
2
Insert the cable (screws facing up) into the connector on the bottom on the system.
3
Connect the power supply to the auxiliary power cable and connect the power supply to AC
power cord.
Note: To check the battery charge, disconnect the cable, power on the system and check the battery
charge icon.
To disconnect the auxiliary power cable:
1
Squeeze the sides of the cable to release it from the system.
2
Pull the connector straight out.
Caution:
To avoid damaging the system connector or the auxiliary power cable, always
unplug the cable before scanning.
Caution:
Permanent damage to the iLook system, power supply, or auxiliary power cable
could result if the connector is inserted incorrectly.