Sonoscape SSI-5500, Руководство пользователя

Страница: 40 / 134

SSI-6000/SSI-5800/SSI-5500/SSI-5500BW
Digital Color Doppler Ultrasound System
3.4 Start Ultrasound Diagnosis
At the preparation mode, move the cursor over the probe icon to select the probe.
The application modes for the selected probe are listed. Refer to Figure 2.1 .
Click a diagnostic icon to start a real time scan.
The system automatically freezes the ultrasound image if there is no user activity
for more than 30 minutes.
3.4.1 Customized application mode (Create New Exam Mode)
For each probe, the system has some predefined application modes for some typ-
ical applications. User can change various settings based on a predefined mode,
and create a customized application mode.
Instructions
1. Customize imaging setting by adjusting various parameters.
2. Click the
SAVE
key during the real time scan.
Going to
User Pre-Set Menu
Are you sure (Y/N)?
3. Type
Y
and select
Create New Exam
.
User Pre-Set Menu
Create New Exam
Delete Exam
Exit
4. Type the name for the new application mode, select OK and press SET key.
5. You can also delete customized mode by selecting “Delete Exam” in step 4. Follow
the on-screen instructions to continue the deletion.
3.4.2 Annotation and Bodymark
3.4.2.1 Annotation
Annotation items can be inserted either in the freeze mode or during the real time
scan.
Press the
ANNOTATION
key to start inserting annotation.
The system predefines a large list of annotation items. User can mod-
ify/add predefined annotation items at the System Setting chapter.
To insert predefined annotations:
1. turn the GAIN knob to scroll between items, turn the D GAIN knob to turn
to the next/previous page of annotation items.
P/N: 4701-0061-01B
3-4