Sonoro SO-331, Руководство по эксплуатации, Страница: 94 / 336

© sonoro audio GmbH 2022 94
14 Optical mode
14.1 Operation
Your external player (e.g., audio amplifier) must be connected to the optical input
jack of PRESTIGE with an audio cable (with optical connector, not supplied).
To access the Optical
mode
Press key on the remote control.
Or, press
MENU
once, then or (or rotate the
navigation knob) to select the Optical mode and then
press
OK
to confirm.
To start and control
playback
Perform all playback operations on the external
player.
To mute or restore the
sound output
Press or button.
14.2 Setup menu
Press
SETUP
in optical input mode to access the setup menu (see chapter “Using
the menus”). The following options are available and the current settings (if
applicable) are marked with an asterisk (*).
•
[Bluetooth headphone]
To connect or disconnect to Bluetooth headphones, see chapter “Basic
operation“.
• [System Settings]
See chapter “System Settings”.
• [Main menu]
To access other playback modes, alarm or sleep timer.
The optical input only supports linear PCM, 2 channels 16 bit or 24bit music
sources.